Tips on how to Add Oil to a Hydraulic Jack

Hydraulic jacks are used to carry heavy objects, akin to cars. They're standard instruments in automotive shops. Hydraulic jacks require fluid to push the pistons that elevate heavy objects off of the ground. You should buy a hydraulic jack, and the oil required to make it perform, at an auto components store. Use the following pointers to add oil to a hydraulic jack.

Select the Type of Hydraulic Jack

Select either a hydraulic flooring jack or a hydraulic bottle jack. A ground jack has a piston that operates in a horizontal motion. A bottle jack incorporates a piston that strikes vertically.

Add Oil to a Hydraulic Ground Jack

Prepare the jack.
Be certain that the jack is completely lowered. Flip the jack's release valve counterclockwise to lower the jack if necessary.

Find the oil filler port.
The hydraulic jack's oil filler port is located on the jack's reservoir. The reservoir is the vertical cylinder mounted on the flat base of the jack. The oil filler port is positioned in the direction of the bottom of the reservoir, close to the flat base of the jack.

Add the oil.

Take away the plug or screw from the oil filler port.
Insert the nozzle of the oilcan into the oil filler port.
Pour oil into the oil filler port.
Cease pouring the oil as quickly because it begins to leak out of the oil filler port.

Close the oil filler port. Change the plug or screw within the oil filler port.

Add Oil to a Hydraulic Bottle Jack

Put together the jack.

Be sure that the jack is completely lowered. Turn the jack's release valve counterclockwise to decrease the jack if necessary.

Find the filler hole.
Find the hydraulic jack's reservoir. The reservoir is the most important external cylinder on the jack. There needs to be a plug or screw roughly 1/3 of the best way down from the highest of the reservoir.

Add the oil.

Take away the plug or screw from the filler hole.
Place the nozzle of the oilcan into the filler hole.
Pour oil into the filler hole.
Cease pouring the oil once it has risen to a stage 1/eight inch (.3 cm) beneath the filler hole.

Shut the filler hole.
Substitute the plug or screw within the filler hole.